Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

非保守力和非完整约束对Hamilton系统Lie对称性的影响

研究非保守力和非完整约束对Hamilton系统的Lie对称性和守恒量的影响.分别研究了Hamilt on系统受到非保守力和非完整约束作用时，系统的Lie对称性保持不变的条件，同时给出了 系统的结构方程和守恒量保持不变的条件.以著名的Emden方程和Appell-Hamel模型为例进行 了分析讨论. 关键词： 分析力学 Hamilton系统 非保守力 非完整约束 对称性 守恒量     

非对称核物质中同位旋对称势的动量和密度依赖性

在Brueckner-Hartree-Fock理论框架内, 研究了同位旋非对称核物质中质子和中子单粒子势的动量相关性及其随同位旋非对称度的变化, 在此基础上计算了同位旋对称势, 并讨论了三体核力的影响. 结果表明同位旋对称势对于同位旋非对称度的依赖性很弱, 但对于动量和密度均有较强的依赖性. 当密度固定时, 同位旋对称势随动量增加而减小. 尽管三体核力对于质子和中子单粒子势的动量相关性有较大影响, 但对同位旋对称势的影响很小. 还与目前重离子碰撞输运理论模型中所使用的各种参数化的唯象对称势进行了比较.     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

存在滑移时两圆球间的幂律流体挤压流动

基于Reynolds润滑理论分析了壁面滑移对任意圆球颗粒间幂律流体的挤压流动的影响。研究表明有壁面滑移时挤压流动的粘性力可通过引进本文定义的滑移修正系数分离出无滑移解。推导出的挤压力滑移修正系数是一积分表达式，依赖于滑移参数、幂律指数、球间隙和积分上限。一般地壁面滑移导致粘性力减小，粘性力的减小量随幂律指数的增大而增大，表明壁面滑移对剪切增稠流变材料有更大的影响；粘性力的减小量还随着滑移参数的增大而增加，而这恰与假设相符合；粘性力的减小量又随球间隙减小或积分上限的增大（从液桥情况到完全浸渍）而减小直到趋于常数，这一特性在离散元模拟时可以有效地减少计算量。     

Morphological and chemical study of the initial growth of CdS thin films deposited using an ammonia-free chemical process

We study the initial growth stages of CdS thin films deposited by an ammonia-free chemical bath deposition process. This ammonia-free process is more environmentally benign because it reduces potential ammonia release to the environment due to its high volatility. Instead of ammonia, sodium citrate was used as the complexing agent. We used atomic force microscopy (AFM), Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS) to investigate the morphological and chemical modifications at the substrate surface during the first initial stages of the CdS deposition process. Additionally, X-ray diffraction (XRD) and optical transmission spectroscopy measurements were carried out to compliment the study. XPS results show that the first nucleation centers are composed by Cd(OH)₂ which agglomerate in patterns of bands, as demonstrated by AFM results. It is also observed that the conversion to CdS (by anionic exchange) of the first nucleus begins before the substrate surface is completely covered by a homogenous film.     

原子力显微术轻敲模式中探针样品接触过程及相位衬度研究

借助简单的有阻尼受迫振子模型，研究了原子力显微术轻敲模式中探针与样品接触时间t_c、样品的表面形变D_z和相位衬度对探针设置高度z_c及样品杨氏模量E_s的依赖关系.结果发现,t_c与D_z均随E_s及z_c的增大而减小，同时探针与样品作用过程伴随很小的能量耗散.对轻敲过程中相移量φ的研究表明，E_s较大的样品有较小的φ，且φ随 关键词： 原子力显微术 轻敲模式 相位衬度     

Atomic scale properties of interior interfaces of semiconductor heterostructures as determined by quasi-digital highly selective etching and atomic force microscopy

We report on first experiments combining quasi-digital highly selective etching and atomic force microscopy (AFM) to examine the interior interfaces of semiconductor heterostructures. Lattice matched (GaIn)As/InP heterostructures grown by metalorganic vapour-phase epitaxy (MOVPE) are taken as a model system to check the capabilities of this new method. Standard selective etchants for different material systems have been optimized in selectivity and etch rate to achieve a quasi-digital etching behaviour. In this way, the real structure of interior interfaces can be determined by AFM. We find a significant difference between the surface of the heterostructure and the interior interfaces.     

类氢及碱金属原子激发态寿命的半经典计算公式

根据对应原理,得到了类氢原子能态平均寿命半经典的计算公式τ(n,l),然后利用相对论单通道量子数亏损理论进行推广,得到用来计算考虑总角动量J的激发态寿命公式τ(n,l,l+1/2)和τ(n,l,l-1/2),利用单通道量子数亏损理论得到了碱金属原子n、l远大于1时激发态寿命的半经典公式τ(n.l)=τ0(m+M/nm/v/+M)2v7l(l+1/2)/n4,其计算结果和实验数据符合的很好.